Industrial and Commercial Epoxy Floor Coatings on Bowers Industrial Sales, Inc.

Products Concrete / Concrete
Containment Coatings
and Linings Industrial and Commercial
Epoxy Floor Coatings Industrial High Temperature
Protective Coatings Industrial Pipe Coatings Industrial Roof Coatings Steel / Tank Linings
and Coatings Chemical
Resistant Concrete and
Waterproofing Products Abrasion Resistant Products Chemical Resistant
Caulking

For Customer Assistance,
call 1-800-892-5224


All Categories > Industrial and Commercial Epoxy Floor Coatings


	Industrial and Commercial Epoxy Floor Coatings
	Click on a Product to view details.


Prime-Crete PC-149 Clear Epoxy Penetrating Primer-Sealer V.O.C. Complaint A low viscosity, two component polyamide modified epoxy primer/sealer formulated with unique wetting agents to provide maximum penetration into concrete surfaces. PC-149 seals concrete surfaces from penetration of water and chemicals which cause concrete deterioration and spalling. Ideal for both new and old concrete surfaces for exterior or interior exposures. PC-149 is also used as a primer for epoxy and polyurethane top coats.




Prime-Crete PC-155 Clear Epoxy Damp Concrete Primer PC-155 is a moisture tolerant two component modified Polyamine Adduct Cured Clear Epoxy designed as a concrete primer to be used under our epoxy grouts, mortars, toppings, high performance coatings and lining systems. The low viscosity provides deep penetration into the concrete for excellent surface adhesion.




Prime-Crete PC-1702 Clear 100% Solids Epoxy Concrete Primer Prime-Crete PC-1702 is a low viscosity, 100% Solids, solvent free two component cycloaliphatic amine cured Epoxy Primer. The PC-1702 is designed for use under epoxy grouts, mortars, toppings, high performance coatings and lining systems. The PC-1702 has been formulated to provide deep penetration into the concrete surface without the use of any solvent, therefore, eliminating any objectionable solvent odor, particularly inside buildings or around food processing and food storage areas. Also, PC-1702 Primer makes an excellent clear/amber floor finish. One (1) or two (2) coats provides a tough, hard, durable film which protects against dusting and surface deterioration. Packaging PC-1702 Primer is available in ...




Poly-Chem PC-650 Heavy-duty Non-skid Coating PC-650 is a two component heavy duty non-skid epoxy coating. PC-650 is designed as a heavy duty non-skid coating for industrial and marine applications. PC-650 helps to provide slip resistance in wet and slippery conditions. Ideal for both new and old concrete surfaces, interior and exterior surfaces. PC-650 is also designed for application on concrete and steel surfaces. This product meets USDA requirements.




PC-517 Poly-Chemcure Glass Filled Epoxy Mastic Coating A two component, very high solids, high build, glass filled, Epoxy Mastic. PC-517 is based on a cycloaliphatic polyamine cured Epoxy. PC-517 Epoxy can be used as a One Coat-20 mil dry film Epoxy Ion horizontal surfaces. This unique coating has excellent chemical, abrasion, impact, and weather resistance with outstanding adhesion to marginally prepared surfaces as well as clean blasted surfaces.




4310 High Performance Lining General Description DUROMAR HPL-4310 is a high functionality, 100% solids novolac material, which can be applied by conventional airless spray equipment. It can be used in power plant outlet ducts, utility systems, petrochemical and acid storage tanks, or anywhere requiring outstanding chemical resistance in an easy to apply coating system. Chemical Description Multi-functional epoxy with a uniquely modified cycloaliphatic amine hardener.




SureGrip Anti-Slip Floor SUREGRIP is an extremely rugged anti-slip floor coating system, which is completely self contained requiring no additional sand or broadcasting of material. The texture of the surface can be varied from a form suitable for shower rooms to one which will provide slip resistance for industrial fork lift traffic by simply switching the nap of the rollers. Colors SUREGRIP is grey in color. Safety yellow and other colors are available on request.




HydroFlor Breathable Floor HYDROFLOR® is an innovative, zero VOC, epoxy floor coating. It has a unique breathable structure, which allows moisture vapor to escape from the concrete. The coating is extremely easy to apply, requiring little or no surface profiling. HYDROFLOR® has a matte, anti-slip finish.




METALCRETE-RAPID Rapid Setting, High Early Strength Metallic Aggregate Patching Mortar Basic Use: Metalcrete Rapid is a rapid setting, high-early, metallic aggregate patching mortar for repair of concrete slabs and pavements. It is a one part system requiring only the addition of water for mixing. Metalcrete Rapid is designed for thicknesses from 1/2 in. (12.7 m) to 3 in. (76 mm). Metalcrete Rapid is intended for floor repairs subjected to severe abrasion and impact. High early strength allows for traffic and abuse within 1-2 hours. Typical Applications: Industrial floors subjected to severe impact; expansion and control joints in floors. Limitations: Do not use as a general overlay material unless cold joints are acceptable. Do not use below 32 ºF (0 ºC). Composition: ...




METALCRETE High-Strength Metallic Aggregate Floor Topping Basic Use: Metalcrete is a screedable, high strength metallic topping intended for use where heavy impact and abrasion are primary floor service conditions. It is applied monolithically over fresh concrete or as a delayed two course bonded topping at a 1/2 in. (12.7 mm) to 1-1/2 in. (38 mm) thickness. Typical Applications: Loading docks, solid waste tipping floors, towveyors, high traffic aisleways, dumpster pads. Limitations: Metalcrete should not be used in areas subjected to acids or other chemicals which attack portland cement or iron. De-icing salts will cause surface oxidation and direct application should be avoided. Composition: Metalcrete is a blend of specially designed iron ...